Worked example | French drain (trench filled with gravel) | Trench length 20, Trench width 40, Trench depth at the high end 60
Excavation: 5.600 m³ · Total fall over the length: 0.20 m · Pipes to buy: 4 · Gravel: 5.987 m³ · Geotextile: 40.00 m²
Enter the length, width and depth of the trench and the fall of the pipe. PRAXAO works out the excavation (the trench deepens towards the outlet), the gravel, the soil backfill when the pipe sits in a gravel surround, the geotextile and the number of pipes. The drawing shows the trench in 3D, its section and its profile along the fall. Widths, depths, surround, overlap and compaction are starting values to replace with the drawings.
Choose the type of work, then enter the dimensions.
Results are provided for information. Check tax rates and legal requirements that apply to you.
Excavation: 5.600 m³ · Total fall over the length: 0.20 m · Pipes to buy: 4 · Gravel: 5.987 m³ · Geotextile: 40.00 m²
No. It counts what a set of dimensions requires. The pipe size for a flow, the fall suited to the soil, the outfall and the geotextile choice come from the engineer.
The depth is taken at the high end. The pipe falls towards the outlet, so the trench is deeper there by the total fall; the volume uses the average depth.
It is the volume it fills minus the volume of the pipe, increased by the compaction allowance. In a French drain it fills the whole trench; with a pipe it fills the bed, the pipe and the cover.
Excavation, gravel, backfill, geotextile and pipes of a drainage trench: the method, with an example.
Pipe lengths, waste, bars, fittings, clips and the drop of a drain: the method to order plumbing material, with examples.
Volume of an excavation, swollen volume to haul, truck loads and weight of soil from the dimensions.
Column, footings and beam: concrete, formwork with or without, pours, stripping and bars by mark, stirrups, starter bars and meshes.
Membrane rolls and primer to waterproof a flat roof or terrace, with upstands, side laps and waste.