Skip to content

Metalwork Quantities (gate, railing, grille)

Choose a gate, a railing or a window grille, enter its dimensions, the tube sections and the bar spacing from your workshop drawing. PRAXAO works out the frame tube, the infill bars, the posts, the weight of steel, the tubes of 6 m to buy with the offcuts, and the surface to paint. The drawing shows the work in 3D and in elevation.

What do you want to calculate?

Choose the type of work, then enter the dimensions.

Results are provided for information. Check tax rates and legal requirements that apply to you.

How to use it

  1. Choose a gate, a railing or a window grille.
  2. Enter the dimensions and the bar spacing.
  3. Replace the starting values (tube sections, embedment, tube length) with the workshop’s data.
  4. Read the tubes to buy, the weight and the paint surface, with the offcuts included.

Examples

Worked example | Gate (portail) | Width 300, Height 200, Spacing of the infill bars (centre to centre) 12

Frame tube, total length: 17.72 m · Infill bars: 24 · Infill bars, total length: 46.08 m · Posts, total length: 4.80 m · Frame tubes to buy: 4 · Infill tubes to buy: 9 · Total steel weight: 82.44 kg · Surface to paint (outer faces): 6.52 m² · Hinges: 2

Frequently asked questions

Does it check strength or safety rules?

No. It counts what a layout requires. Strength, wind and impact loads, and any rule on guard height or the gap between bars come from the regulation that applies to your work and from the workshop drawing.

How is the weight found?

A metre of square tube weighs (side² − (side − 2 × wall)²) × density ÷ 1 000 kg. Each section is multiplied by its total length; the density of steel is editable.

How are the bars counted?

Between the uprights of the frame, one bar every spacing, centre to centre: ⌈clear width ÷ spacing⌉ − 1. Each bar is as long as the clear height between the rails.

Guides to go further

Next step

BUILIVA

Cutting Optimizer

Plan the cuts of bars, profiles, boards and rebar, or of sheets and panels, to buy fewer lengths and waste less.

BUILIVA

Aluminium Joinery Quantities

Doors (WC, stainless, steel, fire), windows, french windows, shutters and curtains, extruded profiles and cladding in aluminium, from your dimensions.

BUILIVA

Rebar: Weight and Bending

Rebar weight from a length or cut pieces, plus cut length and weight of stirrups, L, U and straight bars, with hooks, waste and 12 m bars to buy.