Skip to content

Kitchen Quantities (I, L, U, double I)

Cabinets, corner units, worktop, plinth, cap and hood of an I, L, U or double-I kitchen, from the runs along your walls. Enter the dimensions you already have. Every system value is editable and none is a manufacturer’s figure.

What do you want to calculate?

Choose the type of work, then enter the dimensions.

Results are provided for information. Check tax rates and legal requirements that apply to you.

How to use it

  1. Choose the variant that matches your work, if the tool offers several.
  2. Enter the dimensions and the number of identical items.
  3. Replace the starting values (profile widths, bar or sheet sizes, module width…) with your supplier’s data.
  4. Read the quantities to order, with the waste included.

Examples

Worked example | L-shaped kitchen • First run (back wall; between the corners in an L or U) 2.4 m, Second run (left side in an L or U; opposite wall in a double I) 1.8 m

Base cabinets: 7 · Wall cabinets (hood slots excluded): 4 · Hoods: 1 · Cap, total length: 2.04 m · Cap, front area with waste: 0.79 m² · Worktop area with waste: 3.17 m² · Plinth length: 4.20 m · Base cabinets: 7 · Corner units: 1 · Wall cabinets (hood slots excluded): 4 · Hoods: 1 · Cap, total length: 2.04 m · Cap, front area with waste: 0.79 m² · Worktop area with waste: 3.17 m² · Plinth length: 4.20 m · Base cabinets: 7 · Corner units: 1 · Wall cabinets (hood slots excluded): 4 · Hoods: 1 · Cap, total length: 2.04 m · Cap, front area with waste: 0.79 m² · Worktop area with waste: 3.17 m² · Plinth length: 4.20 m · Base cabinets: 7 · Wall cabinets (hood slots excluded): 4 · Hoods: 1 · Cap, total length: 2.04 m · Cap, front area with waste: 0.79 m² · Worktop area with waste: 3.17 m² · Plinth length: 4.20 m

Frequently asked questions

Does this tool design the work?

No. It counts what a set of dimensions requires. Ratings (thermal, wind, fire, structural), series, hardware and fabrication details come from the manufacturer’s data and the drawings.

Why can I edit the profile, sheet, bar or module values?

They depend on the system and the maker you choose. The values shown are only starting points, never a manufacturer’s reference.

How are the quantities rounded?

The waste percentage is added first, then what has to be bought is rounded up to whole bars, sheets, panels or cabinets.

What is the cap (casquette)?

The cap is the closing box that fills the gap between the wall cabinets and the ceiling.

Guides to go further

Next step

BUILIVA

Aluminium Joinery Quantities

Doors (WC, stainless, steel, fire), windows, french windows, shutters and curtains, extruded profiles and cladding in aluminium, from your dimensions.

BUILIVA

Wood Joinery Quantities

Wooden doors, windows and boards (decking, cladding): timber volume and lengths, board sheets and glass, from your dimensions.

BUILIVA

Cutting Optimizer

Plan the cuts of bars, profiles, boards and rebar, or of sheets and panels, to buy fewer lengths and waste less.